In message [ref] you wrote:
But what amazes me is that no media errors can be detected by doing a
write/read check on every sector of the disk with mke2fs, and no data
corruption occurs when moving data to the set locally!
Can anyone shed some light on what i can try next to isolate what is
causing all this? It's not the software raid code, the IDE set is
If it happens only with downloaded data, you may see data corruption
in the NIC hardware and/or driver. Try using another network card
(other vendor, other type).
Another possible culprit is memory - you may see memory errors under
certain usage patterns. Make sur to run a memory test, and/or try
changing RAM.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office: Kirchenstr. 5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Time is an illusion perpetrated by the manufacturers of space.