Re: trouble creating array

Started by jahammonds prost on Feb 28, 2007

open the first message on its own page

Message details and related content
Just an update for everyone on this (and for the archives), Did some digging, and had a look at the device mapper config

# dmsetup -C info

Name             Maj Min Stat Open Targ Event  UUID
mpath0           253   0 L--w    1    1      0 
VolGroup00-LogVol01 253   3 L--w    1    1      0 LVM-2sahQifzg9s9k0xSkpnzpGCYd7JNVXzUof6XmQ0fhzJ6jIbQLciAbm6lJLwK0Aex
VolGroup00-LogVol00 253   2 L--w    1    1      0 LVM-2sahQifzg9s9k0xSkpnzpGCYd7JNVXzUt3sJ3nwvJF8cr6ebv5AdnY0j4Ajl6U0I
mpath0p1         253   1 L--w    0    1      0 


Those 2 multipath devices shouldn't have been there, and indeed mpath0p1 were my 2 recalcitrant disks.

# dmsetup -C remove mpath0p1
# dmsetup -C remove mpath0

And they were both gone (you need to start at the bottom of the tree when removing them).

A quick fdisk of my disks to create sdb1 and sdc1 partitions, and my array will be synched in 204 mins...:)

Thanks to everyones help for pointing me in the right direction.. It was a trip I would have preferred not to have made, but like all trips like that, it's been illuminating.

Thanks again.


Graham



----- Original Message ----
From: Neil Brown <redacted>
To: jahammonds prost <redacted>
Cc: Justin Piszcz <redacted>; <redacted>
Sent: Sunday, 25 February, 2007 11:40:26 PM
Subject: Re: trouble creating array


On Sunday February 25, gmitch64@yahoo.com wrote:

Any ideas how to find out what has it open? I can happily write all over the disk with dd... I can create and delete the partition, and it's all good... I will try deleting the sd{b,c}1 partitions, reboot, and see what happens.
ls -l /sys/block/*/holders/* ??

NeilBrown


	
	
		
___________________________________________________________ 
New Yahoo! Mail is the ultimate force in competitive emailing. Find out more at the Yahoo! Mail Championships. Plus: play games and win prizes. 
http://uk.rd.yahoo.com/evt=44106/*http://mail.yahoo.net/uk 
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help