md: use async_tx and raid5_run_ops for raid5 expansion operations

Started by Dan Williams on Jan 23, 2007

Subsystems (2)

Maintainers (3)

DORMANTno replies

open the first message on its own page

Message details and related content
From: Dan Williams <redacted>

The parity calculation for an expansion operation is the same as the
calculation performed at the end of a write with the caveat that all blocks
in the stripe are scheduled to be written.  An expansion operation is
identified as a stripe with the POSTXOR flag set and the BIODRAIN flag not
set.

The bulk copy operation to the new stripe is handled inline by async_tx.

Signed-off-by: Dan Williams <redacted>
---

 drivers/md/raid5.c |   48 ++++++++++++++++++++++++++++++++++++------------
 1 files changed, 36 insertions(+), 12 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index db8925f..1956b3c 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2511,18 +2511,32 @@ static void handle_stripe5(struct stripe_head *sh)
 		}
 	}
 
-	if (expanded && test_bit(STRIPE_EXPANDING, &sh->state)) {
-		/* Need to write out all blocks after computing parity */
-		sh->disks = conf->raid_disks;
-		sh->pd_idx = stripe_to_pdidx(sh->sector, conf, conf->raid_disks);
-		compute_parity5(sh, RECONSTRUCT_WRITE);
+	/* Finish postxor operations initiated by the expansion
+	 * process
+	 */
+	if (test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete) &&
+		!test_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending)) {
+
+		clear_bit(STRIPE_EXPANDING, &sh->state);
+
+		clear_bit(STRIPE_OP_POSTXOR, &sh->ops.pending);
+		clear_bit(STRIPE_OP_POSTXOR, &sh->ops.ack);
+		clear_bit(STRIPE_OP_POSTXOR, &sh->ops.complete);
+
 		for (i= conf->raid_disks; i--;) {
-			set_bit(R5_LOCKED, &sh->dev[i].flags);
-			locked++;
 			set_bit(R5_Wantwrite, &sh->dev[i].flags);
+			if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
+				sh->ops.count++;
 		}
-		clear_bit(STRIPE_EXPANDING, &sh->state);
-	} else if (expanded) {
+	}
+
+	if (expanded && test_bit(STRIPE_EXPANDING, &sh->state) &&
+		!test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) {
+		/* Need to write out all blocks after computing parity */
+		sh->disks = conf->raid_disks;
+		sh->pd_idx = stripe_to_pdidx(sh->sector, conf, conf->raid_disks);
+		locked += handle_write_operations5(sh, 0, 1);
+	} else if (expanded && !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) {
 		clear_bit(STRIPE_EXPAND_READY, &sh->state);
 		atomic_dec(&conf->reshape_stripes);
 		wake_up(&conf->wait_for_overlap);
@@ -2533,6 +2547,7 @@ static void handle_stripe5(struct stripe_head *sh)
 		/* We have read all the blocks in this stripe and now we need to
 		 * copy some of them into a target stripe for expand.
 		 */
+		struct dma_async_tx_descriptor *tx = NULL;
 		clear_bit(STRIPE_EXPAND_SOURCE, &sh->state);
 		for (i=0; i< sh->disks; i++)
 			if (i != sh->pd_idx) {
@@ -2556,9 +2571,12 @@ static void handle_stripe5(struct stripe_head *sh)
 					release_stripe(sh2);
 					continue;
 				}
-				memcpy(page_address(sh2->dev[dd_idx].page),
-				       page_address(sh->dev[i].page),
-				       STRIPE_SIZE);
+
+				/* place all the copies on one channel */
+				tx = async_memcpy(sh2->dev[dd_idx].page,
+					sh->dev[i].page, 0, 0, STRIPE_SIZE,
+					ASYNC_TX_DEP_ACK, tx, NULL, NULL);
+
 				set_bit(R5_Expanded, &sh2->dev[dd_idx].flags);
 				set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags);
 				for (j=0; j<conf->raid_disks; j++)
@@ -2570,6 +2588,12 @@ static void handle_stripe5(struct stripe_head *sh)
 					set_bit(STRIPE_HANDLE, &sh2->state);
 				}
 				release_stripe(sh2);
+
+				/* done submitting copies, wait for them to complete */
+				if (i + 1 >= sh->disks) {
+					async_tx_ack(tx);
+					dma_wait_for_async_tx(tx);
+				}
 			}
 	}
 
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help