On Thursday August 17, 76306.1226@compuserve.com wrote:
I just tried the patch and now it seems to be syncing the drives instead
of only checking them? (At the very least the message is misleading.)
Yes, the message is misleading. I should fix that.
NeilBrown
# echo "check" >/sys/block/md0/md/sync_action
# dmesg | tail -9
md: syncing RAID array md0
md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction.
md: using 128k window, over a total of 104256 blocks.
md: md0: sync done.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:hda9
disk 1, wo:0, o:1, dev:sda5