Strange IO stats on RAID1?

Started by Paul Waldo on Aug 30, 2006

open the first message on its own page

Message details and related content
Hi all,

I have an IMAP mail server where mail messages are stored on a RAID1 array.  The access on that array (/dev/md3) has seemed slow, so I did some investigating.  "iostat -x /dev/hd[bd] /dev/md3" shows this:

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
         14.34   47.03   13.99   19.64    0.00    5.00

Device:    rrqm/s wrqm/s   r/s   w/s  rsec/s  wsec/s    rkB/s    wkB/s avgrq-sz avgqu-sz   await  svctm  %util
hdb          1.05  34.88 35.48  2.60 1531.23  299.85   765.62   149.93    48.08     0.20    5.38   3.07  11.69
hdd          0.70  34.83 41.08  2.65  963.12  299.85   481.56   149.93    28.88     0.15    3.49   1.65   7.24
md3          0.00   0.00 78.31 36.98 2494.35  295.85  1247.18   147.93    24.20     0.00    0.00   0.00   0.00




Here  is my /proc/mdstat for md3:

md3 : active raid1 hdb1[0] hdd1[1]
     12699264 blocks [2/2] [UU]


Observations:
- Stats for raw disks writes are similar
- Stats for reads on hdd are about half that of hdd

I may be (or probably am) way off base on this, but I would think that read requests to each disk would be balanced, providing roughly the same level of read activity on each disk.  Is that correct?  Are there any tuning suggestions for increasing performance?

Thanks in advance!

Paul
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help