Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)

From
Neil Brown <hidden>
Date
2006-07-18 00:17:16
Also in
lkml
On Tuesday July 11, petr@anime.cz wrote:
quoted
quoted
quoted
Hm, what's superblock 0.91? It is not mentioned in mdadm.8.
Not sure, the block version perhaps?
Well yes of course, but what characteristics? The manual only lists
 0, 0.90, default
 1, 1.0, 1.1, 1.2
No 0.91 :(

AFAICR superblock version gets raised by 0.01 for the duration of 
reshape, so that non-reshape aware kernels do not try to assemble it 
(and cause data corruption).
Exactly.  The following will be in the next mdadm - unless someone
wants to re-write it for me using shorter sentences :-)

NeilBrown



diff .prev/md.4 ./md.4
--- .prev/md.4	2006-06-20 10:01:17.000000000 +1000
+++ ./md.4	2006-07-18 10:14:47.000000000 +1000
@@ -74,6 +74,14 @@ UUID
 a 128 bit Universally Unique Identifier that identifies the array that
 this device is part of.
 
+When a version 0.90 array is being reshaped (e.g. adding extra devices
+to a RAID5), the version number is temporarily set to 0.91.  This
+ensures that if the reshape process is stopped in the middle (e.g. by
+a system crash) and the machine boots into an older kernel that does
+not support reshaping, then the array will not be assembled (which
+would cause data corruption) but will be left untouched until a kernel
+that can complete the reshape processes is used.
+
 .SS ARRAYS WITHOUT SUPERBLOCKS
 While it is usually best to create arrays with superblocks so that
 they can be assembled reliably, there are some circumstances where an
Thread (1 message) 1 message, 1 author, last reply 2006-07-18
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help