Re: host based mirror distance in a fc-based SAN environment

Stefan Majer wrote:

Hi,

im curious if there are some numbers out up to which distance its possible
to mirror (raid1) 2 FC-LUNs. We have 2 datacenters with a effective
distance of 11km. The fabrics in one datacenter are connected to the
fabrics in the other datacenter with 5 dark fibre both about 11km in
distance.

I want to set up servers wich mirrors their LUNs across the SAN-boxen in
both datacenters. On top of this mirrored LUN i put lvm2.

So the question is does anybody have some numbers up to which distance
this method works ?

No. But have a look at man mdadm in later mdadm:

       -W, --write-mostly
             subsequent devices lists in a --build, --create,  or  --add
             command  will  be flagged as 'write-mostly'.  This is valid
             for RAID1 only and means that the 'md'  driver  will  avoid
             reading from these devices if at all possible.  This can be
             useful if mirroring over a slow link.

       --write-behind=
             Specify that write-behind mode should be enabled (valid for
             RAID1  only).  If an argument is specified, it will set the
             maximum number of outstanding writes allowed.  The  default
             value  is  256.  A write-intent bitmap is required in order
             to  use  write-behind  mode,  and  write-behind   is   only
             attempted on drives marked as write-mostly.

Which suggests that the WAN/LAN latency shouldn't impact you except on
failure.

HTH

David

--