Mark Hahn wrote:

quoted

quoted

I have 4x500GB Maxtor SATA drives and I want to attach
these to a 4-port SATA PCI card and RAID5 them using "md"

Could anybody recommend a card that will have out of
box support on a Fedora system ?

which FC release?  I believe FC4 would have decent support for 
promise tx4's (there are at least two - the most recent might
not work OOB).  sil 3114's ought to work as well.

Hi

Currently FC4, but I could update to FC5 on these machines if necessary.
I should add that performance is not really an issue - it's mostly
a read-only data store.  I don't really want to fork out 250 UKPounds
per SATA card (i.e. 3ware 8506) since I don't need
the capabilities (hardware RAID) nor the performance (but I suppose
if I'm forking out 750 UKP for disks what's another 250?)

Mike Hardy recommended the Addonics ADST114 (sil 3114) which has an entry on 
this page:

http://linuxmafia.com/faq/Hardware/sata.html

A little bit outdated though.  (Amazing how many "RAID" cards are "fakeraid")

Thanks for the help!

Ian

quoted

3ware.  Period.  If you're going to use md, get the 8506-4 series rather 
than either of the 9xxx series cards.

before the 9550, I never found attractive in price/performance: 
expensive as hell and a lot slower than MD.  but the 9550 is really
quite impressive...

regards, mark hahn

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Ian Thurlbeck                http://www.stams.strath.ac.uk/
Statistics and Modelling Science, University of Strathclyde
Livingstone Tower, 26 Richmond Street, Glasgow, UK,  G1 1XH
Tel: +44 (0)141 548 3667           Fax: +44 (0)141 552 2079