Hi Paul,

Isn't the superblock still limited to 27 drives though? .. is there 
maybe a patch for version 1 superblocks that i don't have in 
2.6.12-rc3-mm2, that changes the max drives in the md_p.h and md.c 
driver?  There is only 4096 bytes earmarked for superblocks, and within 
that amount, there isn't enough room to list more than 27 drives that 
may be part of the same array.

Do I need some more patches for this to work, that aren't in the -mm 
tree yet?  I was under the impression (from the mdadm v2.0 announce 
file, that anything *after* 2.6.11-rc3 in the -mm tree would have the 
required patches.

Also, where can I disable the check in mdadm?

Thanks,
Tyler.

Paul Clements wrote:

Tyler wrote:

quoted

PS - I've tryed the latest 2.6.12-rc3-mm2 kernel, with mdadm 
v2.0-devel, using the --metadata 1.0 option on the create line, and 
still get:

quoted

# mdadm -C -e 1.0 -l 6 -n 31 /dev/md0 /dev/hdb /dev/hdc /dev/hdd 
/dev/sda /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sdg 
/dev/sdh /dev/sdi /dev/sdj /dev/sdk /dev/sdl /dev/sdm /dev/sdn 
/dev/sdo /dev/sdp /dev/sdq /dev/sdr /dev/sds /dev/sdt /dev/sdu 
/dev/sdv /dev/sdw /dev/sdx /dev/sdy /dev/sdz /dev/sdaa /dev/sdab
mdadm: invalid number of raid devices: 31

As far as I can tell, mdadm just shouldn't give this error when you're 
using a version 1 superblock. If you disable that check in mdadm.c, I 
think everything will work. Version 1 superblocks allow something like 
2000 disks in an array.

-- 
Paul