RE: Adaptec 3210S Problems

Termination, Cabling and/or Drive Firmware Incompatibilities. Good idea
to get your TSID ready, list of components and their firmware versions
and call Adaptec Support and work through the discovery cookbook.

Sincerely -- Mark Salyzyn

-----Original Message-----
From: linux-raid-owner@vger.kernel.org
[mailto:linux-raid-owner@vger.kernel.org] On Behalf Of Brett I. Holcomb
Sent: Saturday, March 19, 2005 1:22 AM
To: linux-raid@vger.kernel.org
Subject: Adaptec 3210S Problems

I'm running a Linux system with a Adaptec 3210S controller.  Right now
the 
system has nothing on it and I have not created any RAID.  I've notice 
that when I boot into the Adaptec CD and watch the drives they keep 
getting flagged as missing.  If I do a "Read system config" the drives 
show up and the flag goes away.  A few minutes later they are flagged as

missing again.  This is a little discouraging as it appears I have a 
problem.  Any ideas on what is happening - why do my drives keep getting

flagged as missing?  I need to find out before I install Linux!

Thanks.

-- 
Brett I. Holcomb
brettholcomb@R777charter.net
Registered Linux User #188143
Remove R777 to email

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html