Re: RAID5 on different sized disks on low-end machine

On Tuesday 11 January 2005 19:47, Derek Piper wrote:

My question is this, is it possible (and even a good idea) to use all
4 hard drives as members of a 4 x 60GB RAID5 array by leaving 20GB of
the 80GB drive as a non-raided partition? I'll be using a Promise
Ultra TX2/100 controller.

That's perfectly okay.

i.e. RAID5 = 180GB usable size,wherease RAID6 = 120GB .. am I correct
in my thinking?

Yes.

I know many of you use far larger hard drives, I'm just trying to use
the components I already had spare from a number of machines and
reorganize to a RAID-backed fileserver.

My first raid was a raid-0 from two 4.5 GB scsi disks...
My first raid at home was on 4x40GB drives, raid5.

The machine is a dual pentium-pro 200 (320MB RAM) .. would that be a
dumb idea to use RAID5 on it because of the parity calculations
needed?

That raid-5 array above ran on a K6-300...  may not be fast but you can almost 
be sure that a 100Mbit ethernet is still slower...

Further to that, would it be a smarter idea to use RAID1 on all 4 of
some small partition(s) at the start of the disks to house
boot/root/usr partitions, and only RAID5 on a larger 'data' area of
the drive that is more likely to be read than written to?

YES !  If only because it is very hard to boot from raid-5.
But you could use that spare 20GB for the OS, couldn't you ?
Unless you want that redundant too.

Maarten