RE: Adding a new mirror disk to RAID1 configuration
From: Guy <hidden>
Date: 2004-07-09 05:09:32
My guess is you configured the RAID1 array as having 1 disk. Now if you add more disks to it, they are spares. You should have configured the array as having 2 disks, with 1 missing. Then when you add a disk, it will re-build to it. Read about raidreconf. Google it, if needed! It may allow you to modify a RAID1 array. I know it allows you to add a disk to a RAID5 array, but don't know about RAID1. I have never used this tool. Guy -----Original Message----- From: linux-raid-owner@vger.kernel.org [mailto:linux-raid-owner@vger.kernel.org] On Behalf Of Luke Reeves Sent: Friday, July 09, 2004 12:55 AM To: linux-raid@vger.kernel.org Subject: Adding a new mirror disk to RAID1 configuration I have a system with two 40GB drives, and the first drive (hda) is setup under an md device with RAID1 driving it. I'm trying to now make the second disk, hdc, a mirror of the first. When I try to add it using mdadm the second disk becomes a spare and no synchronization is done. Is there any way to add the second disk directly as a mirror? Thanks. Luke Reeves http://www.neuro-tech.net/ - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html