Re: raid0_make_request bug: can't convert block across chunks or bigger than

mru@kth.se (Måns Rullgård) wrote:

I'm using Linux 2.6.0 on an Alpha SX164 machine.  Using four ATA
 disks, hd[egik], on a Highpoint hpt374 controller, I created two raid0
 arrays from hd[eg]1 and hd[ik]1, md0 and md1.  From these, I created a
 raid1 mirror, md4, on which I created an XFS filesystem.  For various
 reasons, I first ran md4 with only md0 as a member and filled it with
 some files, all going well.  Then, I added md1, and it was synced
 properly.  Now, I can mount md4 without problems.  However, when I
 read things, I get this in the kernel log:

 raid0_make_request bug: can't convert block across chunks or bigger than 32k 439200 32

This was fixed post-2.6.0.  2.6.1-rc2 should be OK.

 raid1: Disk failure on md1, disabling device. 
 	Operation continuing on 1 devices

I assume this is due to the raid0 error above.
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html