Hi All,

I am trying to get an adaptec 1210 serial ata raid controller working under
2.6.0. I've also tried 2.4.23
I've found a patch for 2.6.0 by Mark Haverkamp at
http://marc.theaimsgroup.com/?l=linux-scsi&m=10663501617378&w=2 and also a
patch (for 2.4.22) by someone else (not sure who) which just resulted in
lots of "lost interrupt" errors at bootup and it took around 30 minutes to
boot.

The Adaptec BIOS masks interrups on the card.  You can re-enable interrupts
by clearing bits 6 & 7 at PCI configuration space address 0x8a.

--
Justin