Re: Problems with RAID1 on cobalt raq3

On Mon, 2002-08-19 at 01:38, John P. Looney wrote: 

 First off set_boot_dev was used to set the boot device to hda2 (I 
tryed hda1, and as you pointed out, you can't move the root device
easily to hda2 later).

 I had originally planned that hda1 was /boot and hda2 was / - in the end,
to get *anything* booting, I'd to copy the /boot files into a /boot
directory on the / filesystem, and write off hda1 as a waste of disk
space.

I think you want this to be md1, but to do that and have the kernel on
a separate device (not a member of the raid set) will require you to 
override the root device for the ROM kernel with set_lparams. 

I was incorrect in saying that "set_boot_dev md1" does not have the same 
effect as "set_params root=/dev/md1", what I was seeing is actually a bug 
in the ROM.  When you run "set_boot_dev md1" it updates the major/minor 
bytes in CMOS, but it does not set the variable that is used to create 
the zero-page.  This means it will have the stale value until it is 
rebooted. (this is with a 2.9.x ROM, I am not sure about 2.3.40) 

 Woo-hoo. Exactly what I wanted. I think.

 So, do I do 

     set_boot_dev hda1                      (/boot)
     set_params "root=/dev/md0 ro"         

 And that should do what I've been trying to do ? Or do I have to change
the paramters to the ROM kernel also ?

I would try this:

	set_boot_dev md1
	[reboot here - bug workaround]
	set_lparams root=/dev/hda1

(this is assuming hda1 is /boot, and hda2+hdg1=md1 is /)

The problem with this solution is you no longer get the ability to boot
autonomously.  The different root device is not saved in CMOS so has to
be re-entered each time.

-duncan