RE: Mdadm issue

Thanks so much. That fixed it. It is now up and running. 

Tom
:o)

-----Original Message-----
From: linux-raid-owner@vger.kernel.org [mailto:linux-raid-
owner@vger.kernel.org] On Behalf Of Neil Brown
Sent: Wednesday, July 03, 2002 6:15 PM
To: Thomas Hicks
Cc: linux-raid@vger.kernel.org
Subject: Re: Mdadm issue

On Monday July 1, thicks@speedfreak.org wrote:

quoted

This is the first time I am setting up raid using the mdadm tool.

This

quoted

is what I am trying to do.

The sever is as follows: 2 drives at 10gig
                         2 drives at 80gig
hda2 is /
hdd1 is my /home

I have the other drives in ad ready and would like to set up the 2

10

quoted

gig's as a mirror and the 2 80 gig as raid0

At the shell I run this command

mdadm --create /dev/md0  --level=1 --raid-disks=2 /dev/hda2

/dev/hdb1

quoted

and get the following output:

mdadm: /dev/hda2 appears to contain an ext2fs file system
    size=7269412K  mtime=Mon Jul  1 11:56:16 2002
mdadm: /dev/hdb1 appears to contain an ext2fs file system
    size=7333640K  mtime=Mon Jul  1 11:56:29 2002
Continue creating array? y
mdadm: SET_ARRAY_INFO failed for /dev/md0: File exists

Could someone please help me with this problem. I am having a really
hard time finding any info on the web about this.

hda2 is mounted as / and you are trying to make a raid1 array
containing it.  This cannot work.
What you want to do is:

   mdadm --create /dev/md0 --level=1 --raid-disks=2 missing /dev/hdb1

to create a degraded array containing just hdb1.
Then:
    mkfs /dev/md0
    mount /dev/md0 /mnt
    cp -ax / /mnt

to copy your root filesystem onto /dev/md0.
Then tell lilo:
   append= "root=/dev/md0 md=0,/dev/hdb1"
and tell fstab that root in on /md0, and reboot.

Then you should be be running with root on /dev/md0 which consists of
/dev/hdb1, and /dev/hda2 will be unused.
Then
   mdadm --add /dev/md0 /dev/hda2
to add hda2 to the mirror.  Wait for resync.
Change lilo.conf to say the right thinggs, run lilo and reboot.

Note:  it appears that hdb1 is bigger than hda2.  If this is so you
will need to give a --size= to mdadm when created md0 so that it is
small enough to be able to use hda2.
Subtract 128 K from the size of hda2, so
  mdadm --create /dev/md0 --size=7269280 ......

NeilBrown

-
To unsubscribe from this list: send the line "unsubscribe linux-raid"

in

the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html