Re: how to change sector size on fibrechannel drives

Thanks Scott, I'll check it out.  Also, I apologize for sending
this to linux-raid, I meant to type linux-scsi, but made a typo.

Thanks even more for answering an off-topic question!

David

On Wed, Jun 12, 2002 at 05:34:54PM -0400, Scott Bisker wrote:

I know emulex has some utilities available for linux

http://www.emulex.com/ts/docfc/linuxframe.htm

I think the one you are looking for is lputil (LPUTIL).

-sb


On Wed, 2002-06-12 at 17:17, David Nedved wrote:

quoted

Hi All,

I've salvaged some drives from a MTI fibre channel RAID device, and I'm
trying to use them in linux 2.4.18.  When the scsi module loads, it sees
the drives, but reports them all as having the dreaded
"unsupported sector size 528" message.  All the searches I've done seem
to indicate a low-level format of the drives.   The FC card I'm using,
however (Emulex LP8000), doesn't seem to have an option for low-level
formatting.

My fibre channel toys are rather limited, in other words, I don't have
any other controllers with which to low-level these drives.

Am I out of luck?  I wouldn't mind the inefficiency of only using 512
of the 528 bytes in each block if there's some way to override the
default setting... although I would much rather reformat them...

Oh, the drives are all ST136403FC drives if that matters.

Thanks in advance for any clues...

David
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
   __   __   __ _ __ __      __  __ ____ __   __ _ ____ __
  /  | /, | / / // //  |    /  |/ // __//  | / / // __//  |
 / / //   // / // // / /   / , ' // _/ / / // / // _/ / / /
/___//_/_/ |__//_//___/   /_/|__//___//___/ |__//___//___/

Unix Systems Engineer              VOICE: +1 864 331 8181
NuVox Communications, Inc.         FAX:   +1 864 331 7234
301 North Main Street, Ste 5000    EMAIL: dnedved@nuvox.net
Greenville, SC  29601   USA        PAGER: pagenedved@nuvox.net