[PATCH v7 1/5] dt-bindings: thermal: tsens: Add ipq8074 compatible
From: Robert Marko <hidden>
Date: 2022-08-18 22:02:56
Also in:
linux-arm-msm, linux-devicetree, lkml
Subsystem:
arm/qualcomm mailing list, open firmware and flattened device tree bindings, qualcomm tsens thermal driver, the rest, thermal · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Amit Kucheria, Thara Gopinath, Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano
Qualcomm IPQ8074 has tsens v2.3.0 block, though unlike existing v2 IP it only uses one IRQ, so tsens v2 compatible cannot be used as the fallback. We also have to make sure that correct interrupts are set according to compatibles, so populate interrupt information per compatibles. Signed-off-by: Robert Marko <redacted> Reviewed-by: Krzysztof Kozlowski <redacted> --- Changes in v4: * Add the forgotten Reviewed-by tag from Krzysztof Changes in v3: * Remove implied min/maxItem properties as pointed by Rob Changes in v2: * No need for a list in compatible check * Specify minItems and maxItems for interrupt and interrupt-names --- .../bindings/thermal/qcom-tsens.yaml | 76 ++++++++++++++++--- 1 file changed, 65 insertions(+), 11 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 038d81338fcf..fee2b6281417 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml@@ -59,6 +59,10 @@ properties: - qcom,sm8350-tsens - const: qcom,tsens-v2 + - description: v2 of TSENS with combined interrupt + enum: + - qcom,ipq8074-tsens + reg: items: - description: TM registers
@@ -66,15 +70,11 @@ properties: interrupts: minItems: 1 - items: - - description: Combined interrupt if upper or lower threshold crossed - - description: Interrupt if critical threshold crossed + maxItems: 2 interrupt-names: minItems: 1 - items: - - const: uplow - - const: critical + maxItems: 2 nvmem-cells: minItems: 1
@@ -128,22 +128,61 @@ allOf: then: properties: interrupts: - maxItems: 1 + items: + - description: Combined interrupt if upper or lower threshold crossed interrupt-names: - maxItems: 1 + items: + - const: uplow - else: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8953-tsens + - qcom,msm8996-tsens + - qcom,msm8998-tsens + - qcom,sc7180-tsens + - qcom,sc7280-tsens + - qcom,sc8180x-tsens + - qcom,sdm630-tsens + - qcom,sdm845-tsens + - qcom,sm8150-tsens + - qcom,sm8250-tsens + - qcom,sm8350-tsens + - qcom,tsens-v2 + then: + properties: + interrupts: + items: + - description: Combined interrupt if upper or lower threshold crossed + - description: Interrupt if critical threshold crossed + interrupt-names: + items: + - const: uplow + - const: critical + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-tsens + then: properties: interrupts: - minItems: 2 + items: + - description: Combined interrupt if upper, lower or critical thresholds crossed interrupt-names: - minItems: 2 + items: + - const: combined - if: properties: compatible: contains: enum: + - qcom,ipq8074-tsens - qcom,tsens-v0_1 - qcom,tsens-v1 - qcom,tsens-v2
@@ -226,4 +265,19 @@ examples: #qcom,sensors = <13>; #thermal-sensor-cells = <1>; }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + // Example 4 (for any IPQ8074 based SoC-s): + tsens4: thermal-sensor@4a9000 { + compatible = "qcom,ipq8074-tsens"; + reg = <0x4a9000 0x1000>, + <0x4a8000 0x1000>; + + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; + + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; + }; ...
--
2.37.2