Drop the "if (!dev->platform_data)" check, this seems to be an attempt
for allowing loading the driver on devices without devicetree stemming
from the initial commit of the driver (with the presumed intention being
the "return -ENODEV" else branch getting replaced with something else).

With the new "linux,skip-init" and "linux,read-back-settings" properties
the driver can actually supports devices without devicetree and this
check no longer makes sense.

While at it, also switch to dev_err_probe(), which is already used in
various other places in the driver.

Reviewed-by: Andy Shevchenko <redacted>
Signed-off-by: Hans de Goede <redacted>
---
 drivers/power/supply/bq25890_charger.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index d185299db9c3..548d1a793e31 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c

@@ -1048,16 +1048,9 @@ static int bq25890_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	if (!dev->platform_data) {
-		ret = bq25890_fw_probe(bq);
-		if (ret < 0) {
-			dev_err(dev, "Cannot read device properties: %d\n",
-				ret);
-			return ret;
-		}
-	} else {
-		return -ENODEV;
-	}
+	ret = bq25890_fw_probe(bq);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "reading device properties\n");
 
 	ret = bq25890_hw_init(bq);
 	if (ret < 0) {

-- 
2.33.1