[PATCH v1 5/7] ARM: tegra: Add cooling cells to ACTMON device-tree node
From: Dmitry Osipenko <digetx@gmail.com>
Date: 2021-05-10 21:12:09
Also in:
linux-devicetree, linux-tegra, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The ACTMON module monitors activity of memory clients and decisions about a minimum required memory frequency are made based on info from ACTMON. Add cooling cells to ACTMON device-tree node in order to turn it into a cooling device that will throttle memory freq on overheat. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- arch/arm/boot/dts/tegra124.dtsi | 3 ++- arch/arm/boot/dts/tegra30.dtsi | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 0b678afb2a5c..8b38f123f554 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi@@ -283,7 +283,7 @@ flow-controller@60007000 { reg = <0x0 0x60007000 0x0 0x1000>; }; - actmon@6000c800 { + actmon: actmon@6000c800 { compatible = "nvidia,tegra124-actmon"; reg = <0x0 0x6000c800 0x0 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -295,6 +295,7 @@ actmon@6000c800 { operating-points-v2 = <&emc_bw_dfs_opp_table>; interconnects = <&mc TEGRA124_MC_MPCORER &emc>; interconnect-names = "cpu-read"; + #cooling-cells = <2>; }; gpio: gpio@6000d000 {
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 44a6dbba7081..c577c191be4b 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi@@ -410,7 +410,7 @@ ahb: ahb@6000c000 { reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */ }; - actmon@6000c800 { + actmon: actmon@6000c800 { compatible = "nvidia,tegra30-actmon"; reg = <0x6000c800 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -422,6 +422,7 @@ actmon@6000c800 { operating-points-v2 = <&emc_bw_dfs_opp_table>; interconnects = <&mc TEGRA30_MC_MPCORER &emc>; interconnect-names = "cpu-read"; + #cooling-cells = <2>; }; gpio: gpio@6000d000 {
--
2.30.2