[PATCH 32/41] arm64: dts: qcom: sdm630-nile: Add USB
From: Konrad Dybcio <hidden>
Date: 2021-02-26 20:14:07
Also in:
linux-arm-msm, linux-devicetree, lkml, phone-devel
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Enable and configure DWC3 and QUSB2 PHY to enable USB functionality on Nile and Ganges boards. Signed-off-by: Konrad Dybcio <redacted> --- .../dts/qcom/sdm630-sony-xperia-nile.dtsi | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 34a38bff09b8..e17a0f0b1e06 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi@@ -148,6 +148,15 @@ removed_region@85800000 { no-map; }; }; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; + }; }; &blsp_i2c1 {
@@ -182,6 +191,14 @@ &blsp2_uart1 { /* HCI Bluetooth */ }; +&qusb2phy { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + &rpm_requests { pm660l-regulators { compatible = "qcom,rpm-pm660l-regulators";
@@ -536,3 +553,12 @@ cam_vdig_default: cam-vdig-default { drive-strength = <2>; }; }; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +};
--
2.30.1