[PATCH] thermal: qcom: tsens_v1: Enable sensor 3 on MSM8976
- From
- Konrad Dybcio <hidden>
- Date
- 2021-02-25 21:32:41
- Also in
- linux-arm-msm, lkml, phone-devel
The sensor *is* in fact used and does report temperature. Signed-off-by: Konrad Dybcio <redacted> --- drivers/thermal/qcom/tsens-v1.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 3c19a3800c6d..573e261ccca7 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c@@ -380,11 +380,11 @@ static const struct tsens_ops ops_8976 = { .get_temp = get_temp_tsens_valid, }; -/* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */ +/* Valid for both MSM8956 and MSM8976. */ struct tsens_plat_data data_8976 = { .num_sensors = 11, .ops = &ops_8976, - .hw_ids = (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10}, + .hw_ids = (unsigned int[]){0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10}, .feat = &tsens_v1_feat, .fields = tsens_v1_regfields, };
--
2.30.1