[PATCH v4 3/5] dt-bindings: mxsfb: Add interconnect bindings for LCDIF path
STALE2089d
From: Martin Kepplinger <hidden>
Date: 2021-01-07 12:19:24
Also in:
linux-arm-kernel, linux-devicetree, lkml
Subsystem:
drm drivers, drm drivers and misc gpu patches, open firmware and flattened device tree bindings, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v4 of 4 in this series.
Revisions (4)
- v1 [diff vs current]
- v2 [diff vs current]
- v3 [diff vs current]
- v4 current
Add optional interconnect properties for the dram path requests. Signed-off-by: Martin Kepplinger <redacted> --- Documentation/devicetree/bindings/display/mxsfb.txt | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt
index c985871c46b3..d494a2674290 100644
--- a/Documentation/devicetree/bindings/display/mxsfb.txt
+++ b/Documentation/devicetree/bindings/display/mxsfb.txt@@ -15,6 +15,12 @@ Required properties: - "pix" for the LCDIF block clock - (MX6SX-only) "axi", "disp_axi" for the bus interface clock +Optional properties: +- interconnects : interconnect path specifier for LCDIF according to + Documentation/devicetree/bindings/interconnect/interconnect.txt. +- interconnect-names: the name describing the interconnect path. + Should be "dram" for i.MX8MQ. + Required sub-nodes: - port: The connection to an encoder chip.
--
2.20.1