On Mon, Dec 28, 2020 at 06:49:16PM +0300, Dmitry Osipenko wrote:

Add modularization support to the Tegra124 EMC driver, which now can be
compiled as a loadable kernel module.

Note that EMC clock must be registered at clk-init time, otherwise PLLM
will be disabled as unused clock at boot time if EMC driver is compiled
as a module. Hence add a prepare/complete callbacks. similarly to what is
done for the Tegra20/30 EMC drivers.

Tested-by: Nicolas Chauvet <redacted>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/Kconfig            |  3 ++
 drivers/clk/tegra/Makefile           |  2 +-
 drivers/clk/tegra/clk-tegra124-emc.c | 41 ++++++++++++++++++++++++----
 drivers/clk/tegra/clk-tegra124.c     | 26 ++++++++++++++++--
 drivers/clk/tegra/clk.h              | 18 ++++++++----
 drivers/memory/tegra/Kconfig         |  3 +-
 drivers/memory/tegra/tegra124-emc.c  | 31 ++++++++++++++-------
 include/linux/clk/tegra.h            |  8 ++++++
 include/soc/tegra/emc.h              | 16 -----------
 9 files changed, 106 insertions(+), 42 deletions(-)
 delete mode 100644 include/soc/tegra/emc.h

Thanks, applied.

Best regards,
Krzysztof