BPLL clock must not be disabled because it is needed for proper DRAM
operation. This is normally handled by respective memory devfreq driver,
but when that driver is not yet probed or its probe has been deferred the
clock might got disabled what causes board hang. Fix this by marking it
as critical.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/clk/samsung/clk-exynos5420.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index fea33399a632..5ef78928938a 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c

@@ -734,7 +734,7 @@ static const struct samsung_mux_clock exynos5x_mux_clks[] __initconst = {
 	MUX_F(CLK_MOUT_MCLK_CDREX, "mout_mclk_cdrex", mout_mclk_cdrex_p,
 			SRC_CDREX, 4, 1, CLK_SET_RATE_PARENT, 0),
 	MUX_F(CLK_MOUT_BPLL, "mout_bpll", mout_bpll_p, SRC_CDREX, 0, 1,
-			CLK_SET_RATE_PARENT, 0),
+			CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0),
 
 	/* MAU Block */
 	MUX(CLK_MOUT_MAUDIO0, "mout_maudio0", mout_maudio0_p, SRC_MAU, 28, 3),

-- 
2.17.1