Thread (1 message) 1 message, 1 author, 2020-05-18

Re: [PATCH 15/17] ARM: dts: r8a7742: Add APMU nodes

flat view

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2020-05-18 11:41:49
Also in: linux-devicetree, linux-renesas-soc, lkml

Hi Prabhakar,

reduced CC list
added CPUidle people

On Fri, May 15, 2020 at 5:10 PM Lad Prabhakar
[off-list ref] wrote:
Add DT nodes for the Advanced Power Management Units (APMU), and use the
enable-method to point out that the APMU should be used for SMP support.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <redacted>
Thanks for your patch!
quoted hunk
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -18,6 +18,7 @@
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
+               enable-method = "renesas,apmu";
According to Documentation/devicetree/bindings/arm/cpus.yaml,
"enable-method" should be a property of the individual CPU nodes,
and not of the parent "cpus" container node.

However, so far we always put it in the parents "cpus" node, which works from
secondary CPU bringup, but may cause issues with CPUidle?

See also "[PATCH/RFC v2] ARM: dts: r8a7791: Move enable-method to CPU nodes"
https://lore.kernel.org/linux-arm-kernel/20190514085837.18325-1-geert+renesas@glider.be/ (local)
which so far has received no feedback from the DT or CPUidle people.

Thanks!
quoted hunk
                cpu0: cpu@0 {
                        device_type = "cpu";
@@ -305,6 +306,18 @@
                        #reset-cells = <1>;
                };

+               apmu@e6151000 {
+                       compatible = "renesas,r8a7742-apmu", "renesas,apmu";
+                       reg = <0 0xe6151000 0 0x188>;
+                       cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+               };
+
+               apmu@e6152000 {
+                       compatible = "renesas,r8a7742-apmu", "renesas,apmu";
+                       reg = <0 0xe6152000 0 0x188>;
+                       cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
+               };
+
                rst: reset-controller@e6160000 {
                        compatible = "renesas,r8a7742-rst";
                        reg = <0 0xe6160000 0 0x0100>;
Regardless:
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
and I'll see what I will queue in renesas-devel for v5.9 ;-)

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help