On Mon, 24 Feb 2020 12:55:37 +0530, Amit Kucheria wrote:

As part of moving the thermal bindings to YAML, split it up into 3
bindings: thermal sensors, cooling devices and thermal zones.

The thermal-zone binding is a software abstraction to capture the
properties of each zone - how often they should be checked, the
temperature thresholds (trips) at which mitigation actions need to be
taken and the level of mitigation needed at those thresholds.

Signed-off-by: Amit Kucheria <redacted>
---
 .../bindings/thermal/thermal-zones.yaml       | 302 ++++++++++++++++++
 1 file changed, 302 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/thermal-zones.yaml

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-zones.example.dt.yaml: thermal-sensor@c263000: interrupt-names: ['uplow'] is too short
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-zones.example.dt.yaml: thermal-sensor@c263000: interrupts: [[0, 506, 4]] is too short
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-zones.example.dt.yaml: thermal-sensor@c265000: interrupt-names: ['uplow'] is too short
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-zones.example.dt.yaml: thermal-sensor@c265000: interrupts: [[0, 507, 4]] is too short

See https://patchwork.ozlabs.org/patch/1242847
Please check and re-submit.