This patch adds support for new flash which indicates
that trip point triggers irq when temperature is met.
Exynos5433 supports 8 trip point which will trigger irq.
Above that number other trip points should be registered
without 'irq-mode' flag.
That will force the thermal framework to start polling
the temperature sensor under configured conditions and
handle the trip point.

Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lukasz Luba <redacted>
---
 arch/arm/boot/dts/exynos5420-trip-points.dtsi | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
index a67a3807..9e16970 100644
--- a/arch/arm/boot/dts/exynos5420-trip-points.dtsi
+++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi

@@ -11,21 +11,25 @@ trips {
 	cpu-alert-0 {
 		temperature = <85000>; /* millicelsius */
 		hysteresis = <10000>; /* millicelsius */
-		type = "active";
+		type = "passive";
+		irq-mode;
 	};
 	cpu-alert-1 {
 		temperature = <103000>; /* millicelsius */
 		hysteresis = <10000>; /* millicelsius */
-		type = "active";
+		type = "passive";
+		irq-mode;
 	};
 	cpu-alert-2 {
 		temperature = <110000>; /* millicelsius */
 		hysteresis = <10000>; /* millicelsius */
-		type = "active";
+		type = "passive";
+		irq-mode;
 	};
 	cpu-crit-0 {
 		temperature = <120000>; /* millicelsius */
 		hysteresis = <0>; /* millicelsius */
 		type = "critical";
+		irq-mode;
 	};
 };

-- 
2.7.4