-----Original Message-----
From: Rob Herring <robh+dt@kernel.org>
Sent: Wednesday, August 22, 2018 2:15 AM
To: Vabhav Sharma <redacted>
Cc: linux-kernel@vger.kernel.org; devicetree@vger.kernel.org; Mark Rutland
[off-list ref]; linuxppc-dev [off-list ref];
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE <linux-arm-
kernel@lists.infradead.org>; Michael Turquette [off-list ref];
Stephen Boyd [off-list ref]; Rafael J. Wysocki [off-list ref];
Viresh Kumar [off-list ref]; linux-clk <linux-
clk@vger.kernel.org>; open list:THERMAL [off-list ref]; linux-
kernel-owner@vger.kernel.org; Catalin Marinas [off-list ref];
Will Deacon [off-list ref]; Greg Kroah-Hartman
[off-list ref]; Arnd Bergmann [off-list ref]; Kate
Stewart [off-list ref]; Masahiro Yamada
[off-list ref]; Russell King [off-list ref];
Varun Sethi [off-list ref]; Udit Kumar [off-list ref];
Priyanka Jain [off-list ref]; Sriram Dash
[off-list ref]
Subject: Re: [PATCH 5/5] arm64: dts: add LX2160ARDB board support

On Mon, Aug 20, 2018 at 1:52 PM Vabhav Sharma
[off-list ref] wrote:

quoted

LX2160A reference design board (RDB) is a high-performance computing,
evaluation, and development platform with LX2160A SoC.

Signed-off-by: Priyanka Jain <redacted>
Signed-off-by: Sriram Dash <redacted>
Signed-off-by: Vabhav Sharma <redacted>
---
 arch/arm64/boot/dts/freescale/Makefile            |  1 +
 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 95
+++++++++++++++++++++++
 2 files changed, 96 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile

b/arch/arm64/boot/dts/freescale/Makefile
index 86e18ad..445b72b 100644

--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile

@@ -13,3 +13,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-

rdb.dtb

quoted

 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts

b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
new file mode 100644
index 0000000..70fad20

--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts

@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT) // // Device Tree file
+for LX2160ARDB // // Copyright 2018 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+       model = "NXP Layerscape LX2160ARDB";
+       compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
+
+       aliases {
+               crypto = &crypto;

Drop this. Aliases should be numbered, and this is not a standard alias name
either.

Ok

quoted

+               serial0 = &uart0;
+               serial1 = &uart1;
+               serial2 = &uart2;
+               serial3 = &uart3;
+       };
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&i2c0 {
+       status = "okay";
+       pca9547@77 {

i2c-mux@77

Sure

quoted

+               compatible = "nxp,pca9547";
+               reg = <0x77>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x2>;
+
+                       ina220@40 {

power-sensor@40

quoted

+                               compatible = "ti,ina220";
+                               reg = <0x40>;
+                               shunt-resistor = <1000>;
+                       };
+               };
+
+               i2c@3 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x3>;
+
+                       sa56004@4c {

temperature-sensor@4c

Ok, temperature-sensor-1@4c

quoted

+                               compatible = "nxp,sa56004";
+                               reg = <0x4c>;
+                       };
+
+                       sa56004@4d {

Ok,temperature-sensor-2@4d

quoted

+                               compatible = "nxp,sa56004";
+                               reg = <0x4d>;
+                       };
+               };
+       };
+};
+
+&i2c4 {
+       status = "okay";
+
+       rtc@51 {
+               compatible = "nxp,pcf2129";
+               reg = <0x51>;
+               // IRQ10_B
+               interrupts = <0 150 0x4>;
+               };
+
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&usb1 {
+       status = "okay";
+};
+
+&crypto {
+       status = "okay";
+};
--
2.7.4