Hi,

On Mon, Aug 28, 2017 at 02:23:44PM -0700, Liam Breck wrote:

Hi Sebastian, here is this series that was waiting on the power_supply_battery_info
patchset. Thanks!

Thanks, queued.

-- Sebastian

Overview:
BQ24190 uses power_supply_battery_info fields for precharge & charge-termination 
current and a DT property for system min voltage. A new DT binding documents these.

Changes in v4:
* drop ifdef config_of

Changes in v3:
* clarify gpio-hog use in DT binding doc
* drop unrelated change from DT table patch

Changes in v2:
* new patch adds bq24192i to DT table
* dropped patches for power_supply precharge-current; they moved to bq27xxx series
* dropped patches for recently-applied fixes
* rebased to -next

Issues in v1:
* power_supply_prop_precharge & endcharge are added at end of enum to avoid sysfs breakage
* "Set bq24190-battery device .type=unknown" is a temporary workaround to be fixed in v2

Liam Breck (5):
  power: bq24190_charger: Add ti,bq24192i to devicetree table
  devicetree: power: Add docs for TI BQ24190 battery charger
  power: bq24190_charger: Enable devicetree config
  power: bq24190_charger: Add property system-minimum-microvolt
  power: bq24190_charger: Add power_supply_battery_info support

 .../devicetree/bindings/power/supply/bq24190.txt   |  51 +++++++
 drivers/power/supply/bq24190_charger.c             | 169 ++++++++++++++++++---
 2 files changed, 200 insertions(+), 20 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/supply/bq24190.txt

-- 
2.13.2