[PATCH] PM / Domains: Fix compatible for domain idle state
From: Lina Iyer <hidden>
Date: 2017-02-08 16:34:50
Also in:
linux-arm-kernel, linux-arm-msm, linux-devicetree
Subsystem:
driver core, kobjects, debugfs and sysfs, generic pm domains, hibernation (aka software suspend, aka swsusp), open firmware and flattened device tree bindings, power management core, suspend to ram, the rest · Maintainers:
Greg Kroah-Hartman, "Rafael J. Wysocki", Danilo Krummrich, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Re-using idle state definition provided by arm,idle-state for domain idle states creates a lot of confusion and limits further evolution of the domain idle definition. To keep things clear and simple, define a idle states for domain using a new compatible "domain-idle-state". Fix existing PM domains code to look for the newly defined compatible. Cc: <redacted> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Lina Iyer <redacted> --- .../bindings/power/domain-idle-state.txt | 33 ++++++++++++++++++++++ .../devicetree/bindings/power/power_domain.txt | 8 +++--- drivers/base/power/domain.c | 2 +- 3 files changed, 38 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/power/domain-idle-state.txt
diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.txt b/Documentation/devicetree/bindings/power/domain-idle-state.txt
new file mode 100644
index 0000000..eefc7ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/domain-idle-state.txt@@ -0,0 +1,33 @@ +PM Domain Idle State Node: + +A domain idle state node represents the state parameters that will be used to +select the state when there are no active components in the domain. + +The state node has the following parameters - + +- compatible: + Usage: Required + Value type: <string> + Definition: Must be "domain-idle-state". + +- entry-latency-us + Usage: Required + Value type: <prop-encoded-array> + Definition: u32 value representing worst case latency in + microseconds required to enter the idle state. + The exit-latency-us duration may be guaranteed + only after entry-latency-us has passed. + +- exit-latency-us + Usage: Required + Value type: <prop-encoded-array> + Definition: u32 value representing worst case latency + in microseconds required to exit the idle state. + +- min-residency-us + Usage: Required + Value type: <prop-encoded-array> + Definition: u32 value representing minimum residency duration + in microseconds after which the idle state will yield + power benefits after overcoming the overhead in entering +i the idle state.
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
index e165036..723e1ad 100644
--- a/Documentation/devicetree/bindings/power/power_domain.txt
+++ b/Documentation/devicetree/bindings/power/power_domain.txt@@ -31,7 +31,7 @@ Optional properties: - domain-idle-states : A phandle of an idle-state that shall be soaked into a generic domain power state. The idle state definitions are - compatible with arm,idle-state specified in [1]. + compatible with domain-idle-state specified in [1]. The domain-idle-state property reflects the idle state of this PM domain and not the idle states of the devices or sub-domains in the PM domain. Devices and sub-domains have their own idle-states independent of the parent
@@ -85,7 +85,7 @@ Example 3: }; DOMAIN_RET: state@0 { - compatible = "arm,idle-state"; + compatible = "domain-idle-state"; reg = <0x0>; entry-latency-us = <1000>; exit-latency-us = <2000>;
@@ -93,7 +93,7 @@ Example 3: }; DOMAIN_PWR_DN: state@1 { - compatible = "arm,idle-state"; + compatible = "domain-idle-state"; reg = <0x1>; entry-latency-us = <5000>; exit-latency-us = <8000>;
@@ -118,4 +118,4 @@ The node above defines a typical PM domain consumer device, which is located inside a PM domain with index 0 of a power controller represented by a node with the label "power". -[1]. Documentation/devicetree/bindings/arm/idle-states.txt +[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 661737c..f0bc672 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c@@ -2048,7 +2048,7 @@ int genpd_dev_pm_attach(struct device *dev) EXPORT_SYMBOL_GPL(genpd_dev_pm_attach); static const struct of_device_id idle_state_match[] = { - { .compatible = "arm,idle-state", }, + { .compatible = "domain-idle-state", }, { } };
--
2.7.4