[PATCH 15/22] mfd: axp20x: add CHRG_CTRL1 to writeable regs for AXP20X/AXP22X
From: Quentin Schulz <hidden>
Date: 2017-01-02 16:39:48
Also in:
linux-arm-kernel, linux-devicetree, linux-iio, lkml
Subsystem:
multifunction devices (mfd), the rest · Maintainers:
Lee Jones, Linus Torvalds
The CHR_CTRL1 register is made of 7 read-write bits with one being used to set the target voltage for battery charging. This adds the CHRG_CTRL1 register to the list of writeable registers for AXP20X and AXP22X PMICs. Signed-off-by: Quentin Schulz <redacted> --- drivers/mfd/axp20x.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 65c57d0..19bdba3 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c@@ -66,6 +66,7 @@ static const struct regmap_access_table axp152_volatile_table = { static const struct regmap_range axp20x_writeable_ranges[] = { regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), regmap_reg_range(AXP20X_VBUS_IPSOUT_MGMT, AXP20X_VBUS_IPSOUT_MGMT), + regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL1), regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), regmap_reg_range(AXP20X_RDC_H, AXP20X_OCV(AXP20X_OCV_MAX)), };
@@ -94,6 +95,7 @@ static const struct regmap_access_table axp20x_volatile_table = { static const struct regmap_range axp22x_writeable_ranges[] = { regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), regmap_reg_range(AXP20X_VBUS_IPSOUT_MGMT, AXP20X_VBUS_IPSOUT_MGMT), + regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL1), regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1), };
--
2.9.3