[PATCH 09/14] power: supply: axp288_charger: Handle charger type changing without disconnect
From: Hans de Goede <hidden>
Date: 2016-12-19 00:07:55
Also in:
lkml
Subsystem:
power supply class/subsystem and drivers, the rest · Maintainers:
Sebastian Reichel, Linus Torvalds
Deal with the charger type changing without a vbus-disconnect being reported in between the 2 charger type states: -Do not return from axp288_charger_extcon_evt_worker early in this case (track old_chg_type) -Make calling axp288_charger_enable_charger with the same value as before a nop, to avoid the need for the caller to check this -Do no do a dev_err when axp288_charger_enable_charger returns an error, axp288_charger_enable_charger already returns an error itself -Disable the charger before changing the charge-current setting (nop if vbus was seen as disconnected before the change) Signed-off-by: Hans de Goede <redacted> --- drivers/power/supply/axp288_charger.c | 31 +++++++++++++------------------ 1 file changed, 13 insertions(+), 18 deletions(-)
diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c
index 2b95db2..adeea2f 100644
--- a/drivers/power/supply/axp288_charger.c
+++ b/drivers/power/supply/axp288_charger.c@@ -174,7 +174,6 @@ struct axp288_chrg_info { int max_cv; bool online; bool present; - bool enable_charger; bool is_charger_enabled; };
@@ -304,6 +303,9 @@ static int axp288_charger_enable_charger(struct axp288_chrg_info *info, { int ret; + if (enable == info->is_charger_enabled) + return 0; + if (enable) ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1, CHRG_CCCV_CHG_EN, CHRG_CCCV_CHG_EN);
@@ -578,6 +580,7 @@ static void axp288_charger_extcon_evt_worker(struct work_struct *work) bool changed = false; struct extcon_dev *edev = info->cable.edev; bool old_connected = info->cable.connected; + enum power_supply_type old_chg_type = info->cable.chg_type; /* Determine cable/charger type */ if (extcon_get_cable_state_(edev, EXTCON_CHG_USB_SDP) > 0) {
@@ -600,7 +603,8 @@ static void axp288_charger_extcon_evt_worker(struct work_struct *work) } /* Cable status changed */ - if (old_connected != info->cable.connected) + if (old_connected != info->cable.connected || + old_chg_type != info->cable.chg_type) changed = true; if (!changed)
@@ -608,14 +612,9 @@ static void axp288_charger_extcon_evt_worker(struct work_struct *work) mutex_lock(&info->lock); - if (info->is_charger_enabled && !info->cable.connected) { - info->enable_charger = false; - ret = axp288_charger_enable_charger(info, info->enable_charger); - if (ret < 0) - dev_err(&info->pdev->dev, - "cannot disable charger (%d)", ret); + if (info->cable.connected) { + axp288_charger_enable_charger(info, false); - } else if (!info->is_charger_enabled && info->cable.connected) { switch (info->cable.chg_type) { case POWER_SUPPLY_TYPE_USB: current_limit = ILIM_500MA;
@@ -634,17 +633,13 @@ static void axp288_charger_extcon_evt_worker(struct work_struct *work) /* Set vbus current limit first, then enable charger */ ret = axp288_charger_set_vbus_inlmt(info, current_limit); - if (ret < 0) { + if (ret == 0) + axp288_charger_enable_charger(info, true); + else dev_err(&info->pdev->dev, "error setting current limit (%d)", ret); - } else { - info->enable_charger = (current_limit > 0); - ret = axp288_charger_enable_charger(info, - info->enable_charger); - if (ret < 0) - dev_err(&info->pdev->dev, - "cannot enable charger (%d)", ret); - } + } else { + axp288_charger_enable_charger(info, false); } if (changed)
--
2.9.3