Re: [PATCH v2 1/3] ARM: da850: fix infinite loop in clk_set_rate()

The aemif clock is added twice to the lookup table in da850.c. This
breaks the children list of pll0_sysclk3 as we're using the same list
links in struct clk. When calling clk_set_rate(), we get stuck in
propagate_rate().

Create a separate clock for nand, inheriting the rate of the aemif
clock and retrieve it in the davinci_nand module.

Signed-off-by: Bartosz Golaszewski <redacted>
---
 arch/arm/mach-davinci/da850.c   | 7 ++++++-
 drivers/mtd/nand/davinci_nand.c | 2 +-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index e770c97..1fcc986 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c

@@ -367,6 +367,11 @@ static struct clk aemif_clk = {
 	.flags		= ALWAYS_ENABLED,
 };
 
+static struct clk nand_clk = {
+	.name		= "nand",
+	.parent		= &aemif_clk,
+};
+
 static struct clk usb11_clk = {
 	.name		= "usb11",
 	.parent		= &pll0_sysclk4,

@@ -537,7 +542,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK("da830-mmc.0",	NULL,		&mmcsd0_clk),
 	CLK("da830-mmc.1",	NULL,		&mmcsd1_clk),
 	CLK("ti-aemif",		NULL,		&aemif_clk),
-	CLK(NULL,		"aemif",	&aemif_clk),
+	CLK(NULL,		"nand",		&nand_clk),

 	CLK("ohci-da8xx",	"usb11",	&usb11_clk),
 	CLK("musb-da8xx",	"usb20",	&usb20_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),

diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 27fa8b8..5857d06 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c

@@ -694,7 +694,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
 
 	ret = -EINVAL;
 
-	info->clk = devm_clk_get(&pdev->dev, "aemif");
+	info->clk = devm_clk_get(&pdev->dev, "nand");