Hi Chanwoo Choi,

On 2016年08月17日 12:50, Chanwoo Choi wrote:

Hi Lin,

On 2016년 08월 17일 07:36, Lin Huang wrote:

quoted

This patch adds the documentation for rockchip rk3399 dmc driver.

Signed-off-by: Lin Huang <redacted>
---
Changes in v6:
-Add more detail in Documentation

Changes in v5:
-None

Changes in v4:
-None

Changes in v3:
-None

Changes in v2:
-None

Changes in v1:
-None
  .../devicetree/bindings/devfreq/rk3399_dmc.txt     | 84 ++++++++++++++++++++++
  1 file changed, 84 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt

diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
new file mode 100644
index 0000000..e73067c
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt

@@ -0,0 +1,84 @@
+* Rockchip rk3399 DMC(Dynamic Memory Controller) device
+
+Required properties:
+- compatible: Must be "rockchip,rk3399-dmc".
+- devfreq-events: Node to get ddr loading, Refer to
+		  Documentation/devicetree/bindings/devfreq/rockchip-dif.txt
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+	      depends on the interrupt controller. it should be dcf interrupts,
+	      when ddr dvfs finish, it will happen.

If possible, you better to keep the indentation with other properties.
s/it->It, dcf->DCF, ddr->DDR

quoted

+- clocks: Phandles for clock specified in "clock-names" property
+- clock-names : The name of clock used by the DFI, must be "pclk_ddr_mon";
+- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt
+		       for details.

ditto.

quoted

+- center-supply: Dmc supply node.

s/Dmc/DMC becaue DMC an abbreviation.

quoted

+- status: Marks the node enabled/disabled.
+
+Optional properties:
+- ddr_timing: ddr timing need to pass to arm trust firmware
+- upthreshold: the upthreshold to simpleondeamnd policy
+- downdifferential: The downdifferential to simpleondeamnd policy
+
+Example:
+	ddr_timing: ddr_timing {
+		compatible = "rockchip,ddr-timing";

I can't find the 'rockchip,ddr-timing' driver on linux-next git repo (20160816).
If ddr_timing includes the only properties for ddr_timing,
I recommend you make the separate a .dtsi file including
the ddr timing configuration. I add the reference and an example on below.

quoted

+		ddr3_speed_bin = <21>;
+		pd_idle = <0>;
+		sr_idle = <0>;
+		sr_mc_gate_idle = <0>;
+		srpd_lite_idle	= <0>;
+		standby_idle = <0>;
+		dram_dll_dis_freq = <300>;
+		phy_dll_dis_freq = <125>;
+
+		ddr3_odt_dis_freq = <333>;
+		ddr3_drv = <DDR3_DS_40ohm>;
+		ddr3_odt = <DDR3_ODT_120ohm>;
+		phy_ddr3_ca_drv = <PHY_DRV_ODT_40>;
+		phy_ddr3_dq_drv = <PHY_DRV_ODT_40>;
+		phy_ddr3_odt = <PHY_DRV_ODT_240>;
+
+		lpddr3_odt_dis_freq = <333>;
+		lpddr3_drv = <LP3_DS_34ohm>;
+		lpddr3_odt = <LP3_ODT_240ohm>;
+		phy_lpddr3_ca_drv = <PHY_DRV_ODT_40>;
+		phy_lpddr3_dq_drv = <PHY_DRV_ODT_40>;
+		phy_lpddr3_odt = <PHY_DRV_ODT_240>;
+
+		lpddr4_odt_dis_freq = <333>;
+		lpddr4_drv = <LP4_PDDS_60ohm>;
+		lpddr4_dq_odt = <LP4_DQ_ODT_40ohm>;
+		lpddr4_ca_odt = <LP4_CA_ODT_40ohm>;
+		phy_lpddr4_ca_drv = <PHY_DRV_ODT_40>;
+		phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>;
+		phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>;
+		phy_lpddr4_odt = <PHY_DRV_ODT_60>;
+	};
+
+	dmc_opp_table: dmc_opp_table {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <900000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <666000000>;
+			opp-microvolt = <900000>;
+		};
+	};
+
+	dmc: dmc {
+		compatible = "rockchip,rk3399-dmc";
+		devfreq-events = <&dfi>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_DDRCLK>;
+		clock-names = "dmc_clk";
+		ddr_timing = <&ddr_timing>;

You can use the following '#include' instead of 'ddr_timing'
because the ddr_timing is not a device driver. Instead,
the rk3399-dmc must need the ddr timing configuration.

		#include "rk3399-dmc-timing-conf.dtsi"

You can refer the similar usage case[1].
The *.conf.dtsi is used on exynos3250 tmu dt node[2].

[1] arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
[2] arch/arm/boot/dts/exynos3250.dtsi, 224 line.

quoted

+		operating-points-v2 = <&dmc_opp_table>;
+		center-supply = <&ppvar_centerlogic>;
+		upthreshold = <15>;
+		downdifferential = <10>;
+		status = "disabled";
+	};
+

For example,
I think that you can add the following timing .dtsi file.
- arch/arm/boot/dts/rk3399-dmc-timing-conf.dtsi

/*
  * Device tree sources for RK3399 DDR timing configuration
  *
  * Copyright (c) 2016 Lin Huang [off-list ref]
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

rockchip,ddr3_speed_bin = <21>;
rockchip,pd_idle = <0>;
rockchip,sr_idle = <0>;
rockchip,sr_mc_gate_idle = <0>;
rockchip,srpd_lite_idle	= <0>;
rockchip,standby_idle = <0>;
rockchip,dram_dll_dis_freq = <300>;
rockchip,phy_dll_dis_freq = <125>;

rockchip,ddr3_odt_dis_freq = <333>;
rockchip,ddr3_drv = <DDR3_DS_40ohm>;
rockchip,ddr3_odt = <DDR3_ODT_120ohm>;
rockchip,phy_ddr3_ca_drv = <PHY_DRV_ODT_40>;
rockchip,phy_ddr3_dq_drv = <PHY_DRV_ODT_40>;
rockchip,phy_ddr3_odt = <PHY_DRV_ODT_240>;

rockchip,lpddr3_odt_dis_freq = <333>;
rockchip,lpddr3_drv = <LP3_DS_34ohm>;
rockchip,lpddr3_odt = <LP3_ODT_240ohm>;
rockchip,phy_lpddr3_ca_drv = <PHY_DRV_ODT_40>;
rockchip,phy_lpddr3_dq_drv = <PHY_DRV_ODT_40>;
rockchip,phy_lpddr3_odt = <PHY_DRV_ODT_240>;

rockchip,lpddr4_odt_dis_freq = <333>;
rockchip,lpddr4_drv = <LP4_PDDS_60ohm>;
rockchip,lpddr4_dq_odt = <LP4_DQ_ODT_40ohm>;
rockchip,lpddr4_ca_odt = <LP4_CA_ODT_40ohm>;
rockchip,phy_lpddr4_ca_drv = <PHY_DRV_ODT_40>;
rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>;
rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>;
rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>;

Actually, i am doing like it on my downstream dtsi, but how to explain 
it in rk3399_dmc Documentation?
Creat a new ddr_timing Documentation? But it is not a driver, just a 
dtsi, that why i put it on rk3399_dmc.txt
now, do you have a better idea?

Regards,
Chanwoo Choi

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

-- 
Lin Huang