Thread (39 messages) 39 messages, 12 authors, 2016-03-15

Re: [PATCH 12/13] thermal: convert tegra_thermal to use devm_thermal_zone_of_sensor_register

From: Wei Ni <hidden>
Date: 2016-03-15 05:42:16
Also in: linux-tegra, lkml


On 2016年03月15日 05:16, Eduardo Valentin wrote:
* PGP Signed by an unknown key

On Thu, Mar 10, 2016 at 04:46:55PM +0800, Wei Ni wrote:
quoted

On 2016年03月10日 05:35, Eduardo Valentin wrote:
quoted
This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <redacted>
Cc: Stephen Warren <redacted>
Cc: Thierry Reding <redacted>
Cc: Alexandre Courbot <redacted>
Cc: linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Eduardo Valentin <redacted>
---
 drivers/thermal/tegra_soctherm.c | 31 +++++++++----------------------
 1 file changed, 9 insertions(+), 22 deletions(-)
diff --git a/drivers/thermal/tegra_soctherm.c b/drivers/thermal/tegra_soctherm.c
index 74ea576..0018ccd 100644
--- a/drivers/thermal/tegra_soctherm.c
+++ b/drivers/thermal/tegra_soctherm.c
@@ -168,7 +168,7 @@ struct tegra_soctherm {
 	struct clk *clock_soctherm;
 	void __iomem *regs;
 
-	struct thermal_zone_device *thermctl_tzs[4];
+#define ZONE_NUMBER		4
 };
 
 struct tsensor_shared_calibration {
@@ -342,7 +342,7 @@ static const struct thermctl_zone_desc t124_thermctl_temp_zones[] = {
 static int tegra_soctherm_probe(struct platform_device *pdev)
 {
 	struct tegra_soctherm *tegra;
-	struct thermal_zone_device *tz;
+	struct thermal_zone_device *z;
 	struct tsensor_shared_calibration shared_calib;
 	struct resource *res;
 	unsigned int i;
@@ -408,36 +408,29 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
 
 	/* Initialize thermctl sensors */
 
-	for (i = 0; i < ARRAY_SIZE(tegra->thermctl_tzs); ++i) {
+	for (i = 0; i < ZONE_NUMBER; ++i) {
 		struct tegra_thermctl_zone *zone =
 			devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
 		if (!zone) {
 			err = -ENOMEM;
-			goto unregister_tzs;
+			goto disable_clocks;
 		}
 
 		zone->reg = tegra->regs + t124_thermctl_temp_zones[i].offset;
 		zone->shift = t124_thermctl_temp_zones[i].shift;
 
-		tz = thermal_zone_of_sensor_register(&pdev->dev, i, zone,
-						     &tegra_of_thermal_ops);
-		if (IS_ERR(tz)) {
-			err = PTR_ERR(tz);
+		z = devm_thermal_zone_of_sensor_register(&pdev->dev, i, zone,
I prefer to still use "tz", it seems this line isn't over 80 characters, or we
can add newline.

Yeah,

quoted
quoted
+							 &tegra_of_thermal_ops);
CHECK: Alignment should match open parenthesis
#423: FILE: drivers/thermal/tegra_soctherm.c:423:
+		tz = devm_thermal_zone_of_sensor_register(&pdev->dev, i, zone,
+							 &tegra_of_thermal_ops);

and if you align it, then, you get the warning:
WARNING: line over 80 characters
#423: FILE: drivers/thermal/tegra_soctherm.c:423:
+							  &tegra_of_thermal_ops);

And I did not want to add either of the above to the driver. 

But if you prefer tz over z, we can keep the first (check) then.

What do you prefer?
Hmm, I see.
Ok, it's better to use "z" to resolve it.

Wei.




* Unknown Key
* 0x7DA4E256
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help