Similar to the pmu, the general register files contain a lot of different
setting bits grouped into general registers, but also some somewhat special
entities like the controls for some phy-blocks or the io-voltage control.
To be able to move these blocks under the grf node where they actually
belong, make it a simple-mfd.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/boot/dts/rk3288.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 3d46327..8e49c17 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi

@@ -748,7 +748,7 @@
 	};
 
 	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3288-grf", "syscon";
+		compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
 		reg = <0xff770000 0x1000>;
 	};
 

-- 
2.6.4