Re: Occasional (too common) suspend problem

quoted

and here's the one that failed and then ended up coming back on a keypress:

  ...
  [   54.628375] PM: Saving platform NVS memory
  [   54.628387] Disabling non-boot CPUs ...
  [   63.554966] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler
for [EmbeddedControl] (20110112/evregion-474)
  [   63.554992] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.RCTP] (Node f5c2dea0), AE_BAD_PARAMETER
(20110112/psparse-536)
  [   63.555022] ACPI Error: Method parse/execution failed
[\_TZ_.RTMP] (Node f5c32fa8), AE_BAD_PARAMETER (20110112/psparse-536)
  [   63.555047] ACPI Error: Method parse/execution failed
[\_TZ_.TZ00._TMP] (Node f5c34018), AE_BAD_PARAMETER
(20110112/psparse-536)
  [   63.555079] Thermal: failed to read out thermal zone 0
  [   63.556361] CPU 1 is now offline
  [   63.556944] PM: Restoring platform NVS memory
  [   63.556944] Enabling non-boot CPUs ...
  [   63.556944] Booting Node 0 Processor 1 APIC 0x1
  [   63.556279] Initializing CPU#1
  ...

which really doesn't tell me much, except that clearly something in
ACPI-land is unhappy, and it looks thermal-related (that last error
message comes from thermal_zone_device_update()).

The thermal code failed to get the current
temperature (via AML "_TMP" method) because
the embedded controller (or our interface to it) malfunctioned.

Hmm, on looking closer with Rafael, we discovered that
this isn't the EC malfunctioning, these messages result
from us disabling the EC via acpi_ec_block_transactions().

Apparently you've got a thermal zone with polling enabled
every 30 seconds.  These are quite rare, I've only seen
them on asus boxes.  This timeout happened during suspend
when EC was disabled and thus the message.  We should have 
frozen that work-queue...

I don't know if fixing that symptom will fix the suspend
problem, but it can't hurt.

-Len Brown, Intel Open Source Technology Center