[PATCH v15 5/6] phy: rockchip: usbdp: Re-init PHY on mux change

Ensure that the right part of the PHY are powered up when the
mode changes. This ensures the PHY is re-initialized in the
following two scenarios, which are currently broken:

 - cable orientation changes without DP being involved
 - switching from DP-only into a mode with USB support

Fixes: 2f70bbddeb45 ("phy: rockchip: add usbdp combo phy driver")
Tested-by: Igor Paunovic <redacted> # Orange Pi 5 Plus
Signed-off-by: Sebastian Reichel <redacted>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 867f356f394d..ca01c1112c0f 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c

@@ -1391,7 +1391,7 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
 
 	rk_udphy_set_typec_state(udphy, state->mode);
 
-	return 0;
+	return rk_udphy_update_power_state(udphy);
 }
 
 static void rk_udphy_typec_mux_unregister(void *data)

-- 
2.53.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy