[off-list ref] 于2026年9月8日周二 23:41写道:
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [High] A Time-of-Check to Time-of-Use (TOCTOU) race condition in xpcs_rk_create allows a concurrent unbind of the supplier to free the MDIO bus, leading to a Use-After-Free.
- [Medium] Incorrect LIFO teardown ordering in devres clock cleanup action violates proper device initialization and PM hierarchy rules.
--
commit 7142dbf6b28b5ee94d0edc969bcf16d1183a5f41
Author: Coia Prant [off-list ref]
net: pcs: xpcs: add Rockchip RK3568 platform glue driver
This commit adds a platform glue driver for the Synopsys DesignWare xpcs
integrated in the Rockchip RK3568 SoC. It creates a virtual mdio bus to
translate mdio operations to apb3 memory-mapped register accesses.
Link: https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part2%20V1.1-20210301.pdf (Page 2078)
quoted
diff --git a/drivers/net/pcs/pcs-xpcs-rk.c b/drivers/net/pcs/pcs-xpcs-rk.c
new file mode 100644
index 0000000000000..68bcaa1a5cbbf
--- /dev/null
+++ b/drivers/net/pcs/pcs-xpcs-rk.c
[ ... ]
quoted
+static void xpcs_rk_exit_clk(void *data)
+{
+ struct dw_xpcs_rk *pxpcs = data;
+ struct device *dev = &pxpcs->pdev->dev;
+
+ clk_disable_unprepare(pxpcs->eee_clk);
+
+ pm_runtime_force_suspend(dev);
[Severity: Medium]
Does this sequence result in the clock being disabled before the device is
suspended?
In xpcs_rk_init_clk(), eee_clk is enabled first, followed by a call to
pm_runtime_enable(), allowing the device to become runtime active. During
teardown, pm_runtime_force_suspend() invokes xpcs_rk_pm_runtime_suspend()
to disable csr_clk.
Calling clk_disable_unprepare() for eee_clk before pm_runtime_force_suspend()
violates last-in, first-out ordering, disabling the prerequisite clock while
the device is still considered active. Should pm_runtime_force_suspend() be
called prior to disabling the eee_clk?
Sure, I will reorder it.
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy