From: George Moussalem <redacted>
Add the 5V supply regulator and enable USB Super-Speed PHY support.
Reviewed-by: Konrad Dybcio <redacted>
Tested-by: Stanislaw Pal <redacted>
Signed-off-by: George Moussalem <redacted>
---
arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
index 8efb2b21ed9e..ca29f271e673 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -22,6 +22,14 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
+
+ regulator_fixed_5p0: regulator-s0500 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "fixed_5p0";
+ gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+ };
};
&blsp1_uart1 {@@ -119,6 +127,12 @@ &usbphy0 {
status = "okay";
};
+&usbphy1 {
+ vdd-supply = <®ulator_fixed_5p0>;
+
+ status = "okay";
+};
+
&xo_board_clk {
clock-div = <4>;
clock-mult = <1>;
--
2.53.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy