Re: [PATCH v2] phy: allwinner: sun4i-usb: disable the PHY2 PMU clock after SIDDQ setup

From
sashiko-bot@kernel.org
Date
2026-08-13 13:22:40
Also in
linux-sunxi
Reply to
raoxu, 2026-08-13
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:

Pre-existing issues:
- [High] Exclusive reset `phy2->reset` is forcefully asserted on exit, breaking other concurrently active PHYs that rely on the shared PHY2 hardware.
- [Medium] Incorrect teardown order for `phy2` in `sun4i_usb_phy_exit()` disables the clock before asserting the reset.
--
--- Patch [1]: [PATCH v2] phy: allwinner: sun4i-usb: disable the PHY2 PMU clock after SIDDQ setup ---
commit c3b10e6864aadde53d10b7e0b2a5fcb7d0d76e08
Author: Xu Rao [off-list ref]
Subject: phy: allwinner: sun4i-usb: disable the PHY2 PMU clock after SIDDQ setup

This patch fixes a clock enable leak in sun4i_usb_phy_init() by properly
disabling PHY2's clk2 instead of the currently initialized PHY's clk2. It
corrects an unmatched clk_prepare_enable() for the auxiliary PMU access.
quoted hunk ↗ jump to hunk
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index e2fbf8ccf99e1..839856c09e305 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -318,7 +318,7 @@ static int sun4i_usb_phy_init(struct phy *_phy)
 			writel(val, phy2->pmu + REG_HCI_PHY_CTL);
 		}
 
-		clk_disable_unprepare(phy->clk2);
+		clk_disable_unprepare(phy2->clk2);
 	}
 
 	if (phy->pmu && data->cfg->hci_phy_ctl_clear) {
[Severity: Medium]
This isn't a bug introduced by this patch, but looking at how PHY2 is torn
down later in sun4i_usb_phy_exit():

drivers/phy/allwinner/phy-sun4i-usb.c:sun4i_usb_phy_exit() {
	if (data->cfg->needs_phy2_siddq && phy->index != 2) {
		struct sun4i_usb_phy *phy2 = &data->phys[2];

		clk_disable_unprepare(phy2->clk);
		reset_control_assert(phy2->reset);
	}
[ ... ]
}

Is the clock and reset teardown order correct here?

The teardown order disables the clock before asserting the reset, which
reverses the initialization order.

Asserting a hardware reset without the IP block's clock running can sometimes
fail to propagate the reset state or cause a bus lockup.

[Severity: High]
This is also a pre-existing issue, but does asserting this shared
phy2->reset line on exit break other concurrently active PHYs that rely on
PHY2?

Because phy->reset is requested in sun4i_usb_phy_probe() as an exclusive
reset:

drivers/phy/allwinner/phy-sun4i-usb.c:sun4i_usb_phy_probe() {
[ ... ]
		snprintf(name, sizeof(name), "usb%d_reset", i);
		phy->reset = devm_reset_control_get(dev, name);
[ ... ]
}

The reset framework won't refcount it, so unconditionally calling
reset_control_assert(phy2->reset) will force the hardware line into reset
immediately.

This could tear down the shared hardware resource regardless of other active
PHYs using it.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/CE85F490F5646A2C+20260813130542.2425068-1-raoxu@uniontech.com?part=1

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
Thread (2 messages) 2 messages, 2 authors, last reply 2026-08-13
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help