Re: [PATCH v2 03/10] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568
From: Andrew Lunn <andrew@lunn.ch>
Date: 2026-08-01 20:59:17
Also in:
linux-arm-kernel, linux-devicetree, linux-renesas-soc, linux-rockchip, lkml, netdev
On Sat, Aug 01, 2026 at 10:22:27PM +0800, Coia Prant wrote:
On RK3568, the SGMII interface can be routed to either GMAC0 or GMAC1 via the GRF register pipe_sgmii_mac_sel. Add support for this selection by introducing the "rockchip,sgmii-mac-sel" DT property. The hardware reset value is GMAC1 (1). If the property is set to 0, the driver routes SGMII to GMAC0; if set to 1 (or omitted), it remains at GMAC1. This is necessary for boards such as the Ariaboard Photonicat, which uses the SGMII interface connected to GMAC0.
If SGMII is not selected, what MII is used? RGMII? Can this setting be implied from phy-mode? Andrew -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy