On 2/16/25 11:44, Krzysztof Kozlowski wrote:

On 16/02/2025 10:41, Ivaylo Ivanov wrote:

quoted

On 2/16/25 11:26, Krzysztof Kozlowski wrote:

quoted

On 15/02/2025 13:24, Ivaylo Ivanov wrote:

quoted

The Exynos2200 SoC uses Synopsis eUSB2 PHY for USB 2.0. Add a new
driver for it.

eUSB2 on Exynos SoCs is usually paired alongside a USB PHY controller.
Currently the driver is modelled to take and enable/disable the usb phy
controller when needed.

The driver is based on information from downstream drivers.

Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
---
 drivers/phy/samsung/Kconfig                   |  13 +
 drivers/phy/samsung/Makefile                  |   1 +
 .../phy/samsung/phy-exynos2200-snps-eusb2.c   | 351 ++++++++++++++++++
 3 files changed, 365 insertions(+)
 create mode 100644 drivers/phy/samsung/phy-exynos2200-snps-eusb2.c

diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
index e2330b089..f62285254 100644
--- a/drivers/phy/samsung/Kconfig
+++ b/drivers/phy/samsung/Kconfig

@@ -77,6 +77,19 @@ config PHY_S5PV210_USB2
 	  particular SoC is compiled in the driver. In case of S5PV210 two phys
 	  are available - device and host.
 
+config PHY_EXYNOS2200_SNPS_EUSB2
+	tristate "Exynos2200 eUSB 2.0 PHY driver"
+	depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on USB_DWC3_EXYNOS

How does it depend? What are you using from DWC3?

Can drop, I guess.

quoted

quoted

+	select GENERIC_PHY
+	select MFD_SYSCON

Where do you use it?

Remained from USBCON driver.

quoted

quoted

+	default y
+	help
+	  Enable USBCON PHY support for Exynos2200 SoC.
+	  This driver provides PHY interface for eUSB 2.0 controller
+	  present on Exynos5 SoC series.
+
 config PHY_EXYNOS5_USBDRD
 	tristate "Exynos5 SoC series USB DRD PHY driver"
 	depends on (ARCH_EXYNOS && OF) || COMPILE_TEST

diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
index fea1f96d0..90b84c7fc 100644
--- a/drivers/phy/samsung/Makefile
+++ b/drivers/phy/samsung/Makefile

@@ -14,5 +14,6 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2)	+= phy-exynos4210-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2)	+= phy-exynos4x12-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2)	+= phy-exynos5250-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
+obj-$(CONFIG_PHY_EXYNOS2200_SNPS_EUSB2)	+= phy-exynos2200-snps-eusb2.o

Entire driver looks like repeating existing qcom-snps-eusb2.

It's the same IP, but implemented differently on a different platform. At
the very least, the register layout is different.

I checked few registers, looked very the same. Same blocks from synopsys
have the common register layouts.

I see.

quoted

quoted

 You need to
integrate the changes, not create duplicated driver.

I can do that, but it would be come a bit cluttered, won't it? Depends on
if we want to follow the current oem-provided initialization sequence, or
try and fully reuse what we have in there.

I think it duplicates a lot, so it won't be clutter. We have many
drivers having common code and per-variant ops.

So the approach to take here is to make a common driver?

What about the current modelling scheme, as-in taking the phandle to
the usbcon phy and handling it?

Best regards,
Ivaylo

Best regards,
Krzysztof

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy