Re: [PATCH v6 00/14] Add eDP support for RK3588

On Thu Feb 13, 2025 at 3:54 PM CET, Piotr Oniszczuk wrote:

quoted

Wiadomość napisana przez Damon Ding [off-list ref] w dniu 23 sty 2025, o godz. 11:07:

Picked from:
https://patchwork.kernel.org/project/linux-rockchip/list/?series=923593

These patchs have been tested with a 1536x2048p60 eDP panel on
RK3588S EVB1 board, and HDMI 1080P/4K display also has been verified
on RK3588 EVB1 board. Furthermore, the eDP display has been rechecked
on RK3399 sapphire excavator board.
...
9 files changed, 401 insertions(+), 89 deletions(-)

-- 
2.34.1

Damon,

I’m playing with hdmi0 port enablement on radxa rock5 itx board with 6.14 mainline.

rock5 itx has 2 hdmi ports: hdmi0 is wired to rk3588 typeC1/eDP1 eDP with ra620 eDP->HDMI converter and hdmi1 from hdmi/edp tx1
(see page3 & page29 at https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf)

I’m on 6.14-rc2 with applied: 
[1] Cristicc hdmi code (https://gitlab.collabora.com/cristicc/linux-next/-/commits/rk3588-hdmi-bridge)
[2] eDP support for RK3588 (https://patchwork.kernel.org/project/linux-rockchip/list/?series=927765)
[3] Add eDP mode support for Rockchip Samsung HDPTX PHY (https://patchwork.kernel.org/project/linux-rockchip/cover/20250205105157.580060-1-damon.ding@rock-chips.com/)

Is edp1 supported by yours [2] series?

If yes - may you pls hint me about required dts additions in https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts?h=v6.14-rc2 ?

I don't know if it's relevant, but while HDMI0 got enabled for quite a
few devices in 6.13, it did NOT get enabled for Rock 5 ITX.
I made a local patch (which does the same thing as was done for Rock 5B)
but I have no idea if it actually works (I don't have the board).

Maybe you need that for eDP to work?

Cheers,
  Diederik