Hi Adam, Lucas,
Thanks for this series.

This series make HDMI work on evk.
All is working properly on my side.

Tested on: Linux imx8mp-lpddr4-evk 6.9.0-rc1.
Hope this help.

Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>

Thanks & Regards,
Tommaso

On Sat, Feb 03, 2024 at 10:52:40AM -0600, Adam Ford wrote:

The i.MX8M Plus has an HDMI controller, but it depends on two
other systems, the Parallel Video Interface (PVI) and the
HDMI PHY from Samsung. The LCDIF controller generates the display
and routes it to the PVI which converts passes the parallel video
to the HDMI bridge.  The HDMI system has a corresponding power
domain controller whose driver was partially written, but the
device tree for it was never applied, so some changes to the
power domain should be harmless because they've not really been
used yet.

This series is adapted from multiple series from Lucas Stach with
edits and suggestions from feedback from various series, but it
since it's difficult to use and test them independently,
I merged them into on unified series.  The version history is a
bit ambiguous since different components were submitted at different
times and had different amount of retries.  In an effort to merge them
I used the highest version attempt.

Adam Ford (3):
  dt-bindings: soc: imx: add missing clock and power-domains to
    imx8mp-hdmi-blk-ctrl
  pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix
    domain
  arm64: defconfig: Enable DRM_IMX8MP_DW_HDMI_BRIDGE as module

Lucas Stach (9):
  dt-bindings: phy: add binding for the i.MX8MP HDMI PHY
  phy: freescale: add Samsung HDMI PHY
  arm64: dts: imx8mp: add HDMI power-domains
  arm64: dts: imx8mp: add HDMI irqsteer
  dt-bindings: display: imx: add binding for i.MX8MP HDMI PVI
  drm/bridge: imx: add driver for HDMI TX Parallel Video Interface
  dt-bindings: display: imx: add binding for i.MX8MP HDMI TX
  drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI
  arm64: dts: imx8mp: add HDMI display pipeline

 .../display/bridge/fsl,imx8mp-hdmi-tx.yaml    |  102 ++
 .../display/imx/fsl,imx8mp-hdmi-pvi.yaml      |   84 ++
 .../bindings/phy/fsl,imx8mp-hdmi-phy.yaml     |   62 +
 .../soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml     |   22 +-
 arch/arm64/boot/dts/freescale/imx8mp.dtsi     |  145 +++
 arch/arm64/configs/defconfig                  |    1 +
 drivers/gpu/drm/bridge/imx/Kconfig            |   18 +
 drivers/gpu/drm/bridge/imx/Makefile           |    2 +
 drivers/gpu/drm/bridge/imx/imx8mp-hdmi-pvi.c  |  207 ++++
 drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c   |  154 +++
 drivers/phy/freescale/Kconfig                 |    6 +
 drivers/phy/freescale/Makefile                |    1 +
 drivers/phy/freescale/phy-fsl-samsung-hdmi.c  | 1075 +++++++++++++++++
 drivers/pmdomain/imx/imx8mp-blk-ctrl.c        |   10 +-
 14 files changed, 1876 insertions(+), 13 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
 create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8mp-hdmi-phy.yaml
 create mode 100644 drivers/gpu/drm/bridge/imx/imx8mp-hdmi-pvi.c
 create mode 100644 drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
 create mode 100644 drivers/phy/freescale/phy-fsl-samsung-hdmi.c

-- 
2.43.0

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy