Thread (19 messages) 19 messages, 3 authors, 2023-08-31

Re: [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes

From: Dmitry Baryshkov <hidden>
Date: 2023-08-30 20:16:42
Also in: linux-arm-msm, linux-devicetree, linux-usb, lkml

On Fri, 25 Aug 2023 at 12:37, Nitheesh Sekar [off-list ref] wrote:
quoted hunk ↗ jump to hunk
Add USB phy and controller nodes.

Co-developed-by: Amandeep Singh <redacted>
Signed-off-by: Amandeep Singh <redacted>
Signed-off-by: Nitheesh Sekar <redacted>
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi | 54 +++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 9f13d2dcdfd5..ff477923a823 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -238,6 +238,60 @@
                                status = "disabled";
                        };
                };
+
+               usbphy0: phy@5b000 {
+                       compatible = "qcom,ipq5018-usb-hsphy";
+                       reg = <0x0005b000 0x120>;
+
+                       clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+                       resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+                       #phy-cells = <0>;
+
+                       status = "disabled";
+               };
+
+               usb: usb2@8a00000 {
+                       compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
+                       reg = <0x08af8800 0x400>;
+
+                       interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "hs_phy_irq";
+
+                       clocks = <&gcc GCC_USB0_MASTER_CLK>,
+                                <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+                                <&gcc GCC_USB0_SLEEP_CLK>,
+                                <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+                       clock-names = "core",
+                                     "iface",
+                                     "sleep",
+                                     "mock_utmi";
+
+                       resets = <&gcc GCC_USB0_BCR>;
+
+                       qcom,select-utmi-as-pipe-clk;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+
+                       status = "disabled";
+
+                       usb2_0_dwc: usb@8a00000 {
Could you please remove the `2_0' part of the label?
+                               compatible = "snps,dwc3";
+                               reg = <0x08a00000 0xe000>;
+                               clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+                               clock-names = "ref";
+                               interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+                               phy-names = "usb2-phy";
+                               phys = <&usbphy0>;
+                               tx-fifo-resize;
+                               snps,is-utmi-l1-suspend;
+                               snps,hird-threshold = /bits/ 8 <0x0>;
+                               snps,dis_u2_susphy_quirk;
+                               snps,dis_u3_susphy_quirk;
+                       };
+               };
        };

        timer {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

-- 
With best wishes
Dmitry

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help