[PATCH v3 09/11] phy: qcom-qmp-usb: clean up power-down handling
From: Johan Hovold <johan+linaro@kernel.org>
Date: 2022-10-17 06:51:24
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, generic phy framework, the rest · Maintainers:
Vinod Koul, Linus Torvalds
Always define the POWER_DOWN_CONTROL register instead of falling back to the v2 (and v3) offset during power on and power off. Reviewed-by: Dmitry Baryshkov <redacted> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 965e486ab87d..b0b13fb6cb59 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c@@ -126,6 +126,7 @@ static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4, [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8, [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178, + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04, }; static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
@@ -135,6 +136,7 @@ static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8, [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc, [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170, + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04, }; static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
@@ -2164,13 +2166,8 @@ static int qmp_usb_init(struct phy *phy) qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET); } - if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) - qphy_setbits(pcs, - cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], - cfg->pwrdn_ctrl); - else - qphy_setbits(pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL, - cfg->pwrdn_ctrl); + qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], + cfg->pwrdn_ctrl); return 0;
@@ -2277,13 +2274,8 @@ static int qmp_usb_power_off(struct phy *phy) qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); /* Put PHY into POWER DOWN state: active low */ - if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) { - qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], - cfg->pwrdn_ctrl); - } else { - qphy_clrbits(qphy->pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL, - cfg->pwrdn_ctrl); - } + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], + cfg->pwrdn_ctrl); return 0; }
--
2.37.3
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy