[PATCH v2 1/1] dt-bindings: phy: ocelot-serdes: convert to YAML
From: Colin Foster <colin.foster@in-advantage.com>
Date: 2022-09-11 16:37:42
Also in:
linux-devicetree, linux-mips, lkml
Subsystem:
generic phy framework, microsemi mips socs, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Alexandre Belloni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Convert the phy-ocelot-serdes device tree binding to the new YAML format.
Additionally, add the file to MAINTAINERS since the original file didn't
exist.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
v1 -> v2:
* new yaml file is now named mscc,vsc7514-serdes.yaml
* examlpes != examples
* remove "driver" name from the binding
* remove ethernet port consumer from the example
* add additionalProperties: false
* remove unnecessary, obvious sentence in the description
---
.../bindings/phy/mscc,vsc7514-serdes.yaml | 56 +++++++++++++++++++
.../bindings/phy/phy-ocelot-serdes.txt | 43 --------------
MAINTAINERS | 1 +
3 files changed, 57 insertions(+), 43 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml
delete mode 100644 Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt
diff --git a/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml b/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml
new file mode 100644
index 000000000000..3169b873231e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml@@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mscc,vsc7514-serdes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsemi Ocelot SerDes muxing + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - UNGLinuxDriver@microchip.com + +description: | + On Microsemi Ocelot, there is a handful of registers in HSIO address + space for setting up the SerDes to switch port muxing. + + A SerDes X can be "muxed" to work with switch port Y or Z for example. + One specific SerDes can also be used as a PCIe interface. + + Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one. + + There are two kinds of SerDes: SERDES1G supports 10/100Mbps in + half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports + 10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode. + + Also, SERDES6G number (aka "macro") 0 is the only interface supporting + QSGMII. + + This is a child of the HSIO syscon ("mscc,ocelot-hsio", see + Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot. + +properties: + compatible: + enum: + - mscc,vsc7514-serdes + + "#phy-cells": + const: 2 + description: | + The first number defines the input port to use for a given SerDes macro. + The second defines the macro to use. They are defined in + dt-bindings/phy/phy-ocelot-serdes.h + +required: + - compatible + - "#phy-cells" + +additionalProperties: + false + +examples: + - | + serdes: serdes { + compatible = "mscc,vsc7514-serdes"; + #phy-cells = <2>; + };
diff --git a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt
deleted file mode 100644
index 332219860187..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt
+++ /dev/null@@ -1,43 +0,0 @@ -Microsemi Ocelot SerDes muxing driver -------------------------------------- - -On Microsemi Ocelot, there is a handful of registers in HSIO address -space for setting up the SerDes to switch port muxing. - -A SerDes X can be "muxed" to work with switch port Y or Z for example. -One specific SerDes can also be used as a PCIe interface. - -Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one. - -There are two kinds of SerDes: SERDES1G supports 10/100Mbps in -half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports -10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode. - -Also, SERDES6G number (aka "macro") 0 is the only interface supporting -QSGMII. - -This is a child of the HSIO syscon ("mscc,ocelot-hsio", see -Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot. - -Required properties: - -- compatible: should be "mscc,vsc7514-serdes" -- #phy-cells : from the generic phy bindings, must be 2. - The first number defines the input port to use for a given - SerDes macro. The second defines the macro to use. They are - defined in dt-bindings/phy/phy-ocelot-serdes.h - -Example: - - serdes: serdes { - compatible = "mscc,vsc7514-serdes"; - #phy-cells = <2>; - }; - - ethernet { - port1 { - phy-handle = <&phy_foo>; - /* Link SERDES1G_5 to port1 */ - phys = <&serdes 1 SERDES1G_5>; - }; - };
diff --git a/MAINTAINERS b/MAINTAINERS
index 6705fb8bfd3a..806aba01e0bc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS@@ -13493,6 +13493,7 @@ M: UNGLinuxDriver@microchip.com L: linux-mips@vger.kernel.org S: Supported F: Documentation/devicetree/bindings/mips/mscc.txt +F: Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml F: Documentation/devicetree/bindings/power/reset/ocelot-reset.txt F: arch/mips/boot/dts/mscc/ F: arch/mips/configs/generic/board-ocelot.config
--
2.25.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy