Hi Rob,

On Sat, 26 Feb 2022 at 01:38, Rob Herring [off-list ref] wrote:

On Thu, Feb 24, 2022 at 07:59:19AM -0600, Rob Herring wrote:

quoted

On Thu, 24 Feb 2022 18:02:48 +0530, Bhupesh Sharma wrote:

quoted

Since a few boards based on QCoM qmp phy use the
'vdda-max-microamp' & 'vdda-pll-max-microamp' properties to
describe the ufs phy nodes, add them to the dt-bindings doc as well.

This fixes the following '$ make dtbs_check' warning(s):

sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000:
  'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of
   the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'

Cc: Bjorn Andersson <redacted>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <redacted>
---
 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/1597137


phy@1c07000: 'lanes@1c06000' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
      arch/arm/boot/dts/qcom-sdx55-mtp.dt.yaml
      arch/arm/boot/dts/qcom-sdx55-t55.dt.yaml
      arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dt.yaml

phy@1c0e000: 'lanes@1c0e200' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
      arch/arm64/boot/dts/qcom/sc7280-crd.dt.yaml
      arch/arm64/boot/dts/qcom/sc7280-herobrine.dt.yaml
      arch/arm64/boot/dts/qcom/sc7280-idp2.dt.yaml
      arch/arm64/boot/dts/qcom/sc7280-idp.dt.yaml

phy@1d87000: 'lanes@1d87400' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
      arch/arm64/boot/dts/qcom/sm8450-qrd.dt.yaml

phy@627000: 'vdda-phy-max-microamp', 'vddp-ref-clk-always-on', 'vddp-ref-clk-max-microamp' do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
      arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dt.yaml
      arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dt.yaml

I'm curious why these are not fixed too?

Seems I missed this one. Will fix this in v2.
Thanks for pointing it out.

Regards,
Bhupesh

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy